Terapro 220 Concrete Protection & Surfacing for Pedestrian Areas

Rolling the Terapro 220 traffic coating on pedestrian surface
Bucket of Siplast Terapro 220 Resin/Aggregate
Terapro 220 system layers

Terapro 220 is a liquid-applied surfacing layer used alongside a Terapro or Terapro VTS System. It can also be used with just a primer layer to create a concrete protection system.


ADVANTAGES

  • Fast-curing - ready for traffic in approximately 2 hours2 when installed properly
  • Tested in accordance with ASTM E303 to provide skid resistance
  • UV stable and can be applied in temperatures as low as 32°F
  • Aggregate, color, and resin in one package allows you to catalyze, mix, and go


USES

  • Suitable for balconies, terraces, and pedestrian walkways over unoccupied space

About Terapro 220 Resin / Aggregate

Terapro 220 is a liquid-applied, layered application consisting of one coat of primer, waterproofing/wearing layers, a hard-wearing surfacing, and a finish layer all in one product. Terapro 220 can also be used with Terapro reinforced systems for use over occupied/conditioned interior spaces for additional waterproofing protection. Each layer of the system consists of a catalyzed PMMA resin. The completed high-mil thickness application is resilient, monolithic, seamless, durable, and provides protection against UV exposure, ordinary foot traffic, mechanical abuse, and many environmental contaminants1.


The convenience of Terapro 220 is that the aggregate, color, and resin in one package allows you to catalyze, mix, and go. This ability combined with the fast-curing properties of PMMA make Terapro 220 application extremely efficient.


Contact Siplast for specific information on approved product uses.

1Siplast warranties and guarantees do not provide coverage against traffic, physical damage/impact/abuse or exposure to chemicals and other environmental contaminants. Refer to siplast.com for more information on warranty and guarantee coverage and restrictions.

Featured Benefits

2Ambient and substrate temperatures affect the application of Terapro 220/250. Refer to Terapro 220 and Terapro 250 Traffic Surfacing System Installation Guide for ambient and substrate temperature guidelines and restrictions.

Terapro 220 - Beige and Brown

Liquid-applied PMMA aggregate color pigmented blends used as a waterproofing and/or surface layer.

Terapro 220 - Gray

Liquid-applied PMMA aggregate color pigmented blends used as a waterproofing and/or surface layer.

Installation

Application

Refer to the applicable Siplast Technical or Installers Guide for detailed application information, including substrate preparation and application/coverage rates. The product must be catalyzed before use using Pro Catalyst Liquid or Powder. See mixing charts that are supplied with Pro Catalyst products.

Application and coverage rates may vary depending upon the profile and absorbency of substrate. Refer to Siplast Installers Guide for specific applications.


Storage and Handling

Store indoors in a well-ventilated, cool, dry area away from heat, open fire, ignition sources, direct sunlight, oxidizing agents, strong acids, and strong alkalis. Do not store below 32°F (0°C). Products may auto-polymerize at temperatures greater than 140°F (60°C). Store jobsite materials on pallets in a shaded, well-ventilated area. Cover unshaded areas with reflective tarp that allows air circulation. Standard shelf life is 12 months; product life is reduced when stored at temperatures above 77°F (25°C). 

See product packaging and the Safety Data Sheet for specific information on the safe handling of this product.


Packaging

Packaging: 25-kg Resealable Metal Drum 
Weight Per Pail: 55.11 lb (25 kg)
Pails Per Pallet: 36

pro-catalyst

Pro Catalyst

Pro Catalyst Liquid and Pro Catalyst Powder are reactive agents used to induce curing of Terapro, Parapro, and Pro Resins.
View Pro Catalyst products

Recommended Articles